Momentum Modbus Plus 170 PNT Series Guia do Utilizador descarregar pdf (Página 184)

100

101

Configuring an M1 CPU with Modsoft

172

870 USE 101 00 V.2.2

Changing the Baud Rate

Overview

Each port can be configured for a baud in the range 50...19,200. Sixteen valid

bauds are user-selectable. The factory-set default is 9600 baud.

Note:

If you use a baud rate lower than 4800, you should adjust the default delay

parameter. See Changing the Delay

Procedure

To change the baud parameter, perform the steps in the following table.



Step Action

1 Place the cursor on the current Baud entry for the Modbus port you want to enter.

Push

<Enter>

Result:

A popup window appears in the top left corner of the screen displaying 16

baud values:

2 Use an arrow key to toggle the cursor onto the desired Baud selection in the popup

window, then push

<Enter>

Result:

The Port editor screen is updated with the Baud number you have specified,

and the cursor moves to the Head-Slot column.

1 2 ... 179 180 181 182 183 184 185 186 187 188 189 ... 372 373

Comentários a estes Manuais

Sem comentários

Momentum Modbus Plus 170 PNT Series Guia do Utilizador Página 184

Comentários a estes Manuais